EV hypE motor does not turn on.
-
-
- Are the LED lights behind the EV Europe logo not illuminated?
- check that the GND terminal of the EV hype is connected to the chassis
- Measure between pin 1 (red wire) and GND, this should be +12V and also remain +12V during starting. In some older vehicles, this +12V drops out during starting, this should not be
- Measure between pin 2 (yellow) and GND, this is where a +12V pulse should come to during starting (turn key to start engine position)
- check that if a voltage of +12V is put on pin 3 – purple the motor does turn on?
- Are the LED lights behind the EV Europe logo on?
- Connect via the external USB port and the Smartview program. In the diagnostics section, any errors can be read out. Are you not getting a connection? If so, check that high voltage is applied to the EV hypE motor or check that you have installed the correct driver. It can be downloaded here: https://www.go-ev.com/downloads/ftdi.zip
- Are the LED lights behind the EV Europe logo not illuminated?
-
Also watch our video for instuctions:
Leave A Comment