EMUS BMS Connection Board for 48V systems with Victron CAN connection and pre-charge

This Connection PCB is designed for seamless integration with the EMUS BMS in 48V systems, specifically also with integration for Victron ESS systems with standard 48V pre-charging capability

Key features:

• Versatility: Suitable for 48V systems in combination with EMUS BMS operating at 12 – 24V.
• User-friendly interface: Equipped with a USB-B connector for easy communication with the BMS control panel
• CAN configuration: Switchable CAN termination resistor (120 Ohm).
• RJ45 (VE CAN BUS): connector to connect to the Victron CAN bus with a standard Ethernet or RJ45 cable.
• 8-pin Molex connector: for EMUS current sensor.
• Enhanced output capability: 3 galvanically isolated relay inputs, 6 galvanically Isolated relay outputs

Specifications:

• Type CUPPCB48
• Size approx. 130 x 120 mm (excluding EMUS main controller)
• Power supply voltage 38-72 VDC standard
• Total PCB current 5A continuous, 10A peak current
• Temperature range -20 to +70°C
• Wire thickness max 1.5 mm2
• including mounting set