EV HypE™ 90 kWatt / 120 hp conversion kit + reduction 2.2:1 for rear-wheel drive vehicles

Price range: € 11.695,00 through € 32.500,00 Ex. VAT

EV HypE™ 90 kWatt / 120 hp conversion kit + reduction 2.2:1 for rear-wheel drive vehicles
EV HypE™ 90 kWatt / 120 hp conversion kit + reduction 2.2:1 for rear-wheel drive vehicles - Image 2
EV HypE™ 90 kWatt / 120 hp conversion kit + reduction 2.2:1 for rear-wheel drive vehicles - Image 3
EV HypE™ 90 kWatt / 120 hp conversion kit + reduction 2.2:1 for rear-wheel drive vehicles - Image 4
EV HypE™ 90 kWatt / 120 hp conversion kit + reduction 2.2:1 for rear-wheel drive vehicles - Image 5
EV HypE™ 90 kWatt / 120 hp conversion kit + reduction 2.2:1 for rear-wheel drive vehicles - Image 6
EV HypE™ 90 kWatt / 120 hp conversion kit + reduction 2.2:1 for rear-wheel drive vehicles - Image 7
EV HypE™ 90 kWatt / 120 hp conversion kit + reduction 2.2:1 for rear-wheel drive vehicles - Image 8
Categories: , , ,

Data sheets

We have “data sheets” available for more and more products. Click the button below. If not (yet) available contact us and we will help you.

Complete EV conversion kit for rear wheel drive vehicles based on our EV HypE™ drivetrain and2.2:1 propdrive for direct drive cardan shaft with various options for Lithium battery systems. This is not a box of loose parts like other providers for your EV conversion, however as far as possible for assembled, tuned and tested components to make a conversion as easy and with as little labor as possible!

The standard set includes:

  • EV HypE ™ Reluctance 90 kW low voltage max 130 VDC – 235 Nm – “fully assembled, tested and ready to use” drive system including DC-DC inverter, main power fuse, control electronics, simplified charge controller, drive lock, ready to drive signal, all prepared according to EU automotive R100 rules.
  • EV hypE Propdrive with reduction 2.2:1
  • Superspec output power at the driveshaft 90+ kW – 515+ Nm – max 3630 RPM!
  • Pot box.
  • Manual, software and wiring diagram

Dimensions:

The optional battery pack + bms + charger package consists of:

  • Various Lithium battery options including R10 approved BMS system, connection circuit board and Bluetooth app functionality.
  • OEM CAN bus controlled 3.3 kwatt charger or 10 kwatt – 3 phase OEM charging solution + plug set with pre-assembled cable – length 3 meters.
  • Type 2 “Mennekes” charging socket (vehicle side).
  • HV Service disconnect including interlock.
  • 8 mtr orange (according to european R100 rules) HV cable 50 mm2 – shielded + 2 mtr orange HV cable 50 mm2 + 16x cable eye 50 mm2 – 8 mm + 6 mtr CAN communication cable.
  • All the necessary buttons and plugs for a complete EV conversion.

So what is not included?

  • Battery boxes (also to be designed by EV Europe, price on request).
  • DC Heater, however various options available.

Certification for approvals in EU countries:

  • EV HypE™ propulsion R10 revison 5 certified.
  • BMS system R10 rev 4 certified.
  • Components CE certified where applicable according to:
    • LVD 2014/35/EU
    • EMC 2014/30/EU
    • EN 60335-1:2012
    • EN55014-1:2006
    • EN50498:2010

Price range: € 11.695,00 through € 32.500,00 Ex. VAT

Shop our other categories

Also check out these products